--------------------------------------------------
0936E5--RIA1 2015 Intertidal Observations
--------------------------------------------------
****DATA SOURCE****
Source: RefugioSampleDatabase.accdb and Refugio_FinalCSV.accdb

Source data was used as is, without attempting to resolve inconsistencies.

****STUDY PURPOSE****
The purpose of this study is: Assessment

****DATA USE QUALIFICATION****
The data is validated and qualified but the validator and the validation level are not known.

****DATA TYPES****
This study includes results for tissue and oil.

****STATIONS****
Original station coordinates were provided as NAD83 latitude and longitude.  Coordinates were included as reported in the source data.  The reliability of the coordinates was not specified.

The Station identifiers reported in the source data are stored in the ExStnID field.  

The Station identifiers in the source data were truncated for inclusion in the database.

****SAMPLES AND REPLICATES****
The Sample identifiers reported in the source data are stored in the ExSampID field.  The Sample identifiers in the source data were truncated for inclusion in the database. 

Some of the Original Sample Identifiers exceeded 20 characters, so they were placed in the Sample Attribute field.

Sampling dates and sample depth information were provided for all samples.

Some of the tissue samples were reported in the database as composites; this sample type code was retained in the database although no individual locations or other information on  individual part samples was included in the source data.

****CHEMISTRY****
Detection limits were not available for the entire data set.  When possible, the Result value for non-detects reflects the Detection Limit.  If the DL was unavailable, the Reporting Limit was used instead.

****CALCULATED RESULTS****
=== PAH Sums === 
Total low molecular weight PAHs (chemcode = LPAH) were calculated for samples with two or more of the following chemicals reported:
  acenaphthene
  anthracene
  biphenyl
  2,6-dimethylnaphthalene
  fluorene
  1-methylnaphthene
  2-methylnapthene
  1-methylphenanthrene
  phenanthrene
  naphthalene
  
CHEMCODES = ACENAPTHEN, ANTHRACENE, BIPHENYL, METNAP26_2, FLUORENE, METHNAP_1, METHNAP_2, METPHENAN1, PHENANTHRN, NAPTHALENE

Total high molecular weight PAHs (chemcode = HPAH) were calculated for samples with two or more of the following chemicals reported:  
  benz(a)anthracene
  benzo(a)pyrene
  benzo€pyrene
  chrysene
  dibenz(a,h)anthracene
  fluoranthene
  perylene
  pyrene
  
CHEMCODES = BAA, BAP, BEP, CHRYSENE, BANTH2, FLUORANTHN, PERYLENE, PYRENE

Total PAHs (chemcode = TOTAL_PAH) were calculated as the sum of the LPAH and HPAH chemicals as listed above.

****BIOASSAY****
 

****QUALIFIERS****
Qualifiers definitions are provided in the qualifier table.  Definitions were provided with the source data. 

--------------------------------------------------
0936E6--SB 2015 Tissue and Water Sampling
--------------------------------------------------
****DATA SOURCE****
Source: RefugioSampleDatabase.accdb and Refugio_FinalCSV.accdb

Source data was used as is, without attempting to resolve inconsistencies.

****STUDY PURPOSE****
The purpose of this study is: Assessment

****DATA USE QUALIFICATION****
The data is validated and qualified but the validator and the validation level are not known.

****DATA TYPES****
This study includes results for tissue and water.

****STATIONS****
Original station coordinates were provided as NAD83 latitude and longitude.  Coordinates were included as reported in the source data.  The reliability of the coordinates was not specified.

The Station identifiers reported in the source data are stored in the ExStnID field.  

The Station identifiers in the source data were truncated for inclusion in the database.

****SAMPLES AND REPLICATES****
The Sample identifiers reported in the source data are stored in the ExSampID field.  The Sample identifiers in the source data were truncated for inclusion in the database. 

Some of the Original Sample Identifiers exceeded 20 characters, so they were placed in the Sample Attribute field.

Sampling dates and sample depth information were provided for all samples.

****CHEMISTRY****
Detection limits were not available for the entire data set.  When possible, the Result value for non-detects reflects the Detection Limit.  If the DL was unavailable, the Reporting Limit was used instead.

****CALCULATED RESULTS****
=== PAH Sums === 
Total low molecular weight PAHs (chemcode = LPAH) were calculated for samples with two or more of the following chemicals reported:
  acenaphthene
  anthracene
  biphenyl
  2,6-dimethylnaphthalene
  fluorene
  1-methylnaphthene
  2-methylnapthene
  1-methylphenanthrene
  phenanthrene
  naphthalene
  
CHEMCODES = ACENAPTHEN, ANTHRACENE, BIPHENYL, METNAP26_2, FLUORENE, METHNAP_1, METHNAP_2, METPHENAN1, PHENANTHRN, NAPTHALENE

Total high molecular weight PAHs (chemcode = HPAH) were calculated for samples with two or more of the following chemicals reported:  
  benz(a)anthracene
  benzo(a)pyrene
  benzo€pyrene
  chrysene
  dibenz(a,h)anthracene
  fluoranthene
  perylene
  pyrene
  
CHEMCODES = BAA, BAP, BEP, CHRYSENE, BANTH2, FLUORANTHN, PERYLENE, PYRENE

Total PAHs (chemcode = TOTAL_PAH) were calculated as the sum of the LPAH and HPAH chemicals as listed above.

****BIOASSAY****
 

****QUALIFIERS****
Qualifiers definitions are provided in the qualifier table.  Definitions were provided with the source data. 

--------------------------------------------------
0936D1--FC1-FC3 2015 Mussel and Abalone Sampling
--------------------------------------------------
****DATA SOURCE****
Source: RefugioSampleDatabase.accdb and Refugio_FinalCSV.accdb

Source data was used as is, without attempting to resolve inconsistencies.

****STUDY PURPOSE****
The purpose of this study is: Assessment

****DATA USE QUALIFICATION****
The data is validated and qualified but the validator and the validation level are not known.

****DATA TYPES****
This study includes results for tissue.

****STATIONS****
Original station coordinates were provided as NAD83 latitude and longitude.  Coordinates were included as reported in the source data.  The reliability of the coordinates was not specified.

The Station identifiers reported in the source data are stored in the ExStnID field.  

The Station identifiers in the source data were truncated for inclusion in the database.

****SAMPLES AND REPLICATES****
The Sample identifiers reported in the source data are stored in the ExSampID field.  The Sample identifiers in the source data were truncated for inclusion in the database. 

Some of the Original Sample Identifiers exceeded 20 characters, so they were placed in the Sample Attribute field.

Sampling dates and sample depth information were provided for all samples.

Some of the tissue samples were reported in the database as composites; this sample type code was retained in the database although no individual locations or other information on  individual part samples was included in the source data.

****CHEMISTRY****
Detection limits were not available for the entire data set.  When possible, the Result value for non-detects reflects the Detection Limit.  If the DL was unavailable, the Reporting Limit was used instead.

****CALCULATED RESULTS****
=== PAH Sums === 
Total low molecular weight PAHs (chemcode = LPAH) were calculated for samples with two or more of the following chemicals reported:
  acenaphthene
  anthracene
  biphenyl
  2,6-dimethylnaphthalene
  fluorene
  1-methylnaphthene
  2-methylnapthene
  1-methylphenanthrene
  phenanthrene
  naphthalene
  
CHEMCODES = ACENAPTHEN, ANTHRACENE, BIPHENYL, METNAP26_2, FLUORENE, METHNAP_1, METHNAP_2, METPHENAN1, PHENANTHRN, NAPTHALENE

Total high molecular weight PAHs (chemcode = HPAH) were calculated for samples with two or more of the following chemicals reported:  
  benz(a)anthracene
  benzo(a)pyrene
  benzo€pyrene
  chrysene
  dibenz(a,h)anthracene
  fluoranthene
  perylene
  pyrene
  
CHEMCODES = BAA, BAP, BEP, CHRYSENE, BANTH2, FLUORANTHN, PERYLENE, PYRENE

Total PAHs (chemcode = TOTAL_PAH) were calculated as the sum of the LPAH and HPAH chemicals as listed above.

****BIOASSAY****
 

****QUALIFIERS****
Qualifiers definitions are provided in the qualifier table.  Definitions were provided with the source data. 

--------------------------------------------------
0936C4--ED Team 2 2015 Tissue, Water, and Field Sampling
--------------------------------------------------
****DATA SOURCE****
Source: RefugioSampleDatabase.accdb and Refugio_FinalCSV.accdb

Source data was used as is, without attempting to resolve inconsistencies.

****STUDY PURPOSE****
The purpose of this study is: Assessment

****DATA USE QUALIFICATION****
The data is validated and qualified but the validator and the validation level are not known.

****DATA TYPES****
This study includes results for oil, tissue, and water.

****STATIONS****
Original station coordinates were provided as NAD83 latitude and longitude.  Coordinates were included as reported in the source data.  The reliability of the coordinates was not specified.

The Station identifiers reported in the source data are stored in the ExStnID field.  

The Station identifiers in the source data were truncated for inclusion in the database.

****SAMPLES AND REPLICATES****
The Sample identifiers reported in the source data are stored in the ExSampID field.  The Sample identifiers in the source data were truncated for inclusion in the database. 

Some of the Original Sample Identifiers exceeded 20 characters, so they were placed in the Sample Attribute field.

Sampling dates and sample depth information were provided for all samples.

Some of the tissue samples were reported in the database as composites; this sample type code was retained in the database although no individual locations or other information on  individual part samples was included in the source data.

****CHEMISTRY****
Detection limits were not available for the entire data set.  When possible, the Result value for non-detects reflects the Detection Limit.  If the DL was unavailable, the Reporting Limit was used instead.

****CALCULATED RESULTS****
=== PAH Sums === 
Total low molecular weight PAHs (chemcode = LPAH) were calculated for samples with two or more of the following chemicals reported:
  acenaphthene
  anthracene
  biphenyl
  2,6-dimethylnaphthalene
  fluorene
  1-methylnaphthene
  2-methylnapthene
  1-methylphenanthrene
  phenanthrene
  naphthalene
  
CHEMCODES = ACENAPTHEN, ANTHRACENE, BIPHENYL, METNAP26_2, FLUORENE, METHNAP_1, METHNAP_2, METPHENAN1, PHENANTHRN, NAPTHALENE

Total high molecular weight PAHs (chemcode = HPAH) were calculated for samples with two or more of the following chemicals reported:  
  benz(a)anthracene
  benzo(a)pyrene
  benzo€pyrene
  chrysene
  dibenz(a,h)anthracene
  fluoranthene
  perylene
  pyrene
  
CHEMCODES = BAA, BAP, BEP, CHRYSENE, BANTH2, FLUORANTHN, PERYLENE, PYRENE

Total PAHs (chemcode = TOTAL_PAH) were calculated as the sum of the LPAH and HPAH chemicals as listed above.

****BIOASSAY****
 

****QUALIFIERS****
Qualifiers definitions are provided in the qualifier table.  Definitions were provided with the source data. 

--------------------------------------------------
0936D8--MU1-MU3 2015 NRDA Mussel Sampling
--------------------------------------------------
****DATA SOURCE****
Source: RefugioSampleDatabase.accdb and Refugio_FinalCSV.accdb

Source data was used as is, without attempting to resolve inconsistencies.

****STUDY PURPOSE****
The purpose of this study is: Assessment

****DATA USE QUALIFICATION****
The data is validated and qualified but the validator and the validation level are not known.

****DATA TYPES****
This study includes results for tissue.

****STATIONS****
Original station coordinates were provided as NAD83 latitude and longitude.  Coordinates were included as reported in the source data.  The reliability of the coordinates was not specified.

The Station identifiers reported in the source data are stored in the ExStnID field.  

The Station identifiers in the source data were truncated for inclusion in the database.

****SAMPLES AND REPLICATES****
The Sample identifiers reported in the source data are stored in the ExSampID field.  The Sample identifiers in the source data were truncated for inclusion in the database. 

Some of the Original Sample Identifiers exceeded 20 characters, so they were placed in the Sample Attribute field.

Sampling dates and sample depth information were provided for all samples.

Some of the tissue samples were reported in the database as composites; this sample type code was retained in the database although no individual locations or other information on  individual part samples was included in the source data.

****CHEMISTRY****
Detection limits were not available for the entire data set.  When possible, the Result value for non-detects reflects the Detection Limit.  If the DL was unavailable, the Reporting Limit was used instead.

****CALCULATED RESULTS****
=== PAH Sums === 
Total low molecular weight PAHs (chemcode = LPAH) were calculated for samples with two or more of the following chemicals reported:
  acenaphthene
  anthracene
  biphenyl
  2,6-dimethylnaphthalene
  fluorene
  1-methylnaphthene
  2-methylnapthene
  1-methylphenanthrene
  phenanthrene
  naphthalene
  
CHEMCODES = ACENAPTHEN, ANTHRACENE, BIPHENYL, METNAP26_2, FLUORENE, METHNAP_1, METHNAP_2, METPHENAN1, PHENANTHRN, NAPTHALENE

Total high molecular weight PAHs (chemcode = HPAH) were calculated for samples with two or more of the following chemicals reported:  
  benz(a)anthracene
  benzo(a)pyrene
  benzo€pyrene
  chrysene
  dibenz(a,h)anthracene
  fluoranthene
  perylene
  pyrene
  
CHEMCODES = BAA, BAP, BEP, CHRYSENE, BANTH2, FLUORANTHN, PERYLENE, PYRENE

Total PAHs (chemcode = TOTAL_PAH) were calculated as the sum of the LPAH and HPAH chemicals as listed above.

****BIOASSAY****
 

****QUALIFIERS****
Qualifiers definitions are provided in the qualifier table.  Definitions were provided with the source data. 

--------------------------------------------------
0936E9--USFWS 2015 Mussel Sampling
--------------------------------------------------
****DATA SOURCE****
Source: RefugioSampleDatabase.accdb and Refugio_FinalCSV.accdb

Source data was used as is, without attempting to resolve inconsistencies.

****STUDY PURPOSE****
The purpose of this study is: Assessment

****DATA USE QUALIFICATION****
The data is validated and qualified but the validator and the validation level are not known.

****DATA TYPES****
This study includes results for tissue.

****STATIONS****
Original station coordinates were provided as NAD83 latitude and longitude.  Coordinates were included as reported in the source data.  The reliability of the coordinates was not specified.

The Station identifiers reported in the source data are stored in the ExStnID field.  

The Station identifiers in the source data were truncated for inclusion in the database.

****SAMPLES AND REPLICATES****
The Sample identifiers reported in the source data are stored in the ExSampID field.  The Sample identifiers in the source data were truncated for inclusion in the database. 

Some of the Original Sample Identifiers exceeded 20 characters, so they were placed in the Sample Attribute field.

Sampling dates and sample depth information were provided for all samples.

****CHEMISTRY****
Detection limits were not available for the entire data set.  When possible, the Result value for non-detects reflects the Detection Limit.  If the DL was unavailable, the Reporting Limit was used instead.

****CALCULATED RESULTS****
=== PAH Sums === 
Total low molecular weight PAHs (chemcode = LPAH) were calculated for samples with two or more of the following chemicals reported:
  acenaphthene
  anthracene
  biphenyl
  2,6-dimethylnaphthalene
  fluorene
  1-methylnaphthene
  2-methylnapthene
  1-methylphenanthrene
  phenanthrene
  naphthalene
  
CHEMCODES = ACENAPTHEN, ANTHRACENE, BIPHENYL, METNAP26_2, FLUORENE, METHNAP_1, METHNAP_2, METPHENAN1, PHENANTHRN, NAPTHALENE

Total high molecular weight PAHs (chemcode = HPAH) were calculated for samples with two or more of the following chemicals reported:  
  benz(a)anthracene
  benzo(a)pyrene
  benzo€pyrene
  chrysene
  dibenz(a,h)anthracene
  fluoranthene
  perylene
  pyrene
  
CHEMCODES = BAA, BAP, BEP, CHRYSENE, BANTH2, FLUORANTHN, PERYLENE, PYRENE

Total PAHs (chemcode = TOTAL_PAH) were calculated as the sum of the LPAH and HPAH chemicals as listed above.

****BIOASSAY****
 

****QUALIFIERS****
Qualifiers definitions are provided in the qualifier table.  Definitions were provided with the source data. 

--------------------------------------------------
0936C5--ED Team 3 2015 Mussel and Tarball Sampling
--------------------------------------------------
****DATA SOURCE****
Source: RefugioSampleDatabase.accdb and Refugio_FinalCSV.accdb

Source data was used as is, without attempting to resolve inconsistencies.

****STUDY PURPOSE****
The purpose of this study is: Assessment

****DATA USE QUALIFICATION****
The data is validated and qualified but the validator and the validation level are not known.

****DATA TYPES****
This study includes results for tissue and oil.

****STATIONS****
Original station coordinates were provided as NAD83 latitude and longitude.  Coordinates were included as reported in the source data.  The reliability of the coordinates was not specified.

The Station identifiers reported in the source data are stored in the ExStnID field.  

The Station identifiers in the source data were truncated for inclusion in the database.

****SAMPLES AND REPLICATES****
The Sample identifiers reported in the source data are stored in the ExSampID field.  The Sample identifiers in the source data were truncated for inclusion in the database. 

Some of the Original Sample Identifiers exceeded 20 characters, so they were placed in the Sample Attribute field.

Sampling dates and sample depth information were provided for all samples.

****CHEMISTRY****
Detection limits were not available for the entire data set.  When possible, the Result value for non-detects reflects the Detection Limit.  If the DL was unavailable, the Reporting Limit was used instead.

****CALCULATED RESULTS****
=== PAH Sums === 
Total low molecular weight PAHs (chemcode = LPAH) were calculated for samples with two or more of the following chemicals reported:
  acenaphthene
  anthracene
  biphenyl
  2,6-dimethylnaphthalene
  fluorene
  1-methylnaphthene
  2-methylnapthene
  1-methylphenanthrene
  phenanthrene
  naphthalene
  
CHEMCODES = ACENAPTHEN, ANTHRACENE, BIPHENYL, METNAP26_2, FLUORENE, METHNAP_1, METHNAP_2, METPHENAN1, PHENANTHRN, NAPTHALENE

Total high molecular weight PAHs (chemcode = HPAH) were calculated for samples with two or more of the following chemicals reported:  
  benz(a)anthracene
  benzo(a)pyrene
  benzo€pyrene
  chrysene
  dibenz(a,h)anthracene
  fluoranthene
  perylene
  pyrene
  
CHEMCODES = BAA, BAP, BEP, CHRYSENE, BANTH2, FLUORANTHN, PERYLENE, PYRENE

Total PAHs (chemcode = TOTAL_PAH) were calculated as the sum of the LPAH and HPAH chemicals as listed above.

****BIOASSAY****
 

****QUALIFIERS****
Qualifiers definitions are provided in the qualifier table.  Definitions were provided with the source data. 

--------------------------------------------------
0936C6--ED Team 4 2015 Mussel, Tarball, and Field Sampling
--------------------------------------------------
****DATA SOURCE****
Source: RefugioSampleDatabase.accdb and Refugio_FinalCSV.accdb

Source data was used as is, without attempting to resolve inconsistencies.

****STUDY PURPOSE****
The purpose of this study is: Assessment

****DATA USE QUALIFICATION****
The data is validated and qualified but the validator and the validation level are not known.

****DATA TYPES****
This study includes results for tissue and oil.

****STATIONS****
Original station coordinates were provided as NAD83 latitude and longitude.  Coordinates were included as reported in the source data.  The reliability of the coordinates was not specified.

The Station identifiers reported in the source data are stored in the ExStnID field.  

The Station identifiers in the source data were truncated for inclusion in the database.

****SAMPLES AND REPLICATES****
The Sample identifiers reported in the source data are stored in the ExSampID field.  The Sample identifiers in the source data were truncated for inclusion in the database. 

Some of the Original Sample Identifiers exceeded 20 characters, so they were placed in the Sample Attribute field.

Sampling dates and sample depth information were provided for all samples.

****CHEMISTRY****
Detection limits were not available for the entire data set.  When possible, the Result value for non-detects reflects the Detection Limit.  If the DL was unavailable, the Reporting Limit was used instead.

****CALCULATED RESULTS****
=== PAH Sums === 
Total low molecular weight PAHs (chemcode = LPAH) were calculated for samples with two or more of the following chemicals reported:
  acenaphthene
  anthracene
  biphenyl
  2,6-dimethylnaphthalene
  fluorene
  1-methylnaphthene
  2-methylnapthene
  1-methylphenanthrene
  phenanthrene
  naphthalene
  
CHEMCODES = ACENAPTHEN, ANTHRACENE, BIPHENYL, METNAP26_2, FLUORENE, METHNAP_1, METHNAP_2, METPHENAN1, PHENANTHRN, NAPTHALENE

Total high molecular weight PAHs (chemcode = HPAH) were calculated for samples with two or more of the following chemicals reported:  
  benz(a)anthracene
  benzo(a)pyrene
  benzo€pyrene
  chrysene
  dibenz(a,h)anthracene
  fluoranthene
  perylene
  pyrene
  
CHEMCODES = BAA, BAP, BEP, CHRYSENE, BANTH2, FLUORANTHN, PERYLENE, PYRENE

Total PAHs (chemcode = TOTAL_PAH) were calculated as the sum of the LPAH and HPAH chemicals as listed above.

****BIOASSAY****
 

****QUALIFIERS****
Qualifiers definitions are provided in the qualifier table.  Definitions were provided with the source data. 

--------------------------------------------------
0936C8--ED Team 6 2015 Mussel Sampling
--------------------------------------------------
****DATA SOURCE****
Source: RefugioSampleDatabase.accdb and Refugio_FinalCSV.accdb

Source data was used as is, without attempting to resolve inconsistencies.

****STUDY PURPOSE****
The purpose of this study is: Assessment

****DATA USE QUALIFICATION****
The data is validated and qualified but the validator and the validation level are not known.

****DATA TYPES****
This study includes results for tissue.

****STATIONS****
Original station coordinates were provided as NAD83 latitude and longitude.  Coordinates were included as reported in the source data.  The reliability of the coordinates was not specified.

The Station identifiers reported in the source data are stored in the ExStnID field.  

The Station identifiers in the source data were truncated for inclusion in the database.

****SAMPLES AND REPLICATES****
The Sample identifiers reported in the source data are stored in the ExSampID field.  The Sample identifiers in the source data were truncated for inclusion in the database. 

Some of the Original Sample Identifiers exceeded 20 characters, so they were placed in the Sample Attribute field.

Sampling dates and sample depth information were provided for all samples.

****CHEMISTRY****
Detection limits were not available for the entire data set.  When possible, the Result value for non-detects reflects the Detection Limit.  If the DL was unavailable, the Reporting Limit was used instead.

****CALCULATED RESULTS****
=== PAH Sums === 
Total low molecular weight PAHs (chemcode = LPAH) were calculated for samples with two or more of the following chemicals reported:
  acenaphthene
  anthracene
  biphenyl
  2,6-dimethylnaphthalene
  fluorene
  1-methylnaphthene
  2-methylnapthene
  1-methylphenanthrene
  phenanthrene
  naphthalene
  
CHEMCODES = ACENAPTHEN, ANTHRACENE, BIPHENYL, METNAP26_2, FLUORENE, METHNAP_1, METHNAP_2, METPHENAN1, PHENANTHRN, NAPTHALENE

Total high molecular weight PAHs (chemcode = HPAH) were calculated for samples with two or more of the following chemicals reported:  
  benz(a)anthracene
  benzo(a)pyrene
  benzo€pyrene
  chrysene
  dibenz(a,h)anthracene
  fluoranthene
  perylene
  pyrene
  
CHEMCODES = BAA, BAP, BEP, CHRYSENE, BANTH2, FLUORANTHN, PERYLENE, PYRENE

Total PAHs (chemcode = TOTAL_PAH) were calculated as the sum of the LPAH and HPAH chemicals as listed above.

****BIOASSAY****
 

****QUALIFIERS****
Qualifiers definitions are provided in the qualifier table.  Definitions were provided with the source data. 

--------------------------------------------------
0936E4--RI1-RI4 2015 Mussel Sampling
--------------------------------------------------
****DATA SOURCE****
Source: RefugioSampleDatabase.accdb and Refugio_FinalCSV.accdb

Source data was used as is, without attempting to resolve inconsistencies.

****STUDY PURPOSE****
The purpose of this study is: Assessment

****DATA USE QUALIFICATION****
The data is validated and qualified but the validator and the validation level are not known.

****DATA TYPES****
This study includes results for tissue.

****STATIONS****
Original station coordinates were provided as NAD83 latitude and longitude.  Coordinates were included as reported in the source data.  The reliability of the coordinates was not specified.

The Station identifiers reported in the source data are stored in the ExStnID field.  

The Station identifiers in the source data were truncated for inclusion in the database.

****SAMPLES AND REPLICATES****
The Sample identifiers reported in the source data are stored in the ExSampID field.  The Sample identifiers in the source data were truncated for inclusion in the database. 

Some of the Original Sample Identifiers exceeded 20 characters, so they were placed in the Sample Attribute field.

Sampling dates and sample depth information were provided for all samples.

****CHEMISTRY****
Detection limits were not available for the entire data set.  When possible, the Result value for non-detects reflects the Detection Limit.  If the DL was unavailable, the Reporting Limit was used instead.

****CALCULATED RESULTS****
=== PAH Sums === 
Total low molecular weight PAHs (chemcode = LPAH) were calculated for samples with two or more of the following chemicals reported:
  acenaphthene
  anthracene
  biphenyl
  2,6-dimethylnaphthalene
  fluorene
  1-methylnaphthene
  2-methylnapthene
  1-methylphenanthrene
  phenanthrene
  naphthalene
  
CHEMCODES = ACENAPTHEN, ANTHRACENE, BIPHENYL, METNAP26_2, FLUORENE, METHNAP_1, METHNAP_2, METPHENAN1, PHENANTHRN, NAPTHALENE

Total high molecular weight PAHs (chemcode = HPAH) were calculated for samples with two or more of the following chemicals reported:  
  benz(a)anthracene
  benzo(a)pyrene
  benzo€pyrene
  chrysene
  dibenz(a,h)anthracene
  fluoranthene
  perylene
  pyrene
  
CHEMCODES = BAA, BAP, BEP, CHRYSENE, BANTH2, FLUORANTHN, PERYLENE, PYRENE

Total PAHs (chemcode = TOTAL_PAH) were calculated as the sum of the LPAH and HPAH chemicals as listed above.

****BIOASSAY****
 

****QUALIFIERS****
Qualifiers definitions are provided in the qualifier table.  Definitions were provided with the source data. 

--------------------------------------------------
0936C2--ED Team 1 2015 Tissue, Water, and Field Sampling
--------------------------------------------------
****DATA SOURCE****
Source: RefugioSampleDatabase.accdb and Refugio_FinalCSV.accdb

Source data was used as is, without attempting to resolve inconsistencies.

****STUDY PURPOSE****
The purpose of this study is: Assessment

****DATA USE QUALIFICATION****
The data is validated and qualified but the validator and the validation level are not known.

****DATA TYPES****
This study includes results for oil, sediment, tissue, and water.

****STATIONS****
Original station coordinates were provided as NAD83 latitude and longitude.  Coordinates were included as reported in the source data.  The reliability of the coordinates was not specified.

The Station identifiers reported in the source data are stored in the ExStnID field.  

The Station identifiers in the source data were truncated for inclusion in the database.

****SAMPLES AND REPLICATES****
The Sample identifiers reported in the source data are stored in the ExSampID field.  The Sample identifiers in the source data were truncated for inclusion in the database. 

Some of the Original Sample Identifiers exceeded 20 characters, so they were placed in the Sample Attribute field.

Sampling dates and sample depth information were provided for all samples.

Some of the tissue samples were reported in the database as composites; this sample type code was retained in the database although no individual locations or other information on  individual part samples was included in the source data.

****CHEMISTRY****
Detection limits were not available for the entire data set.  When possible, the Result value for non-detects reflects the Detection Limit.  If the DL was unavailable, the Reporting Limit was used instead.

****CALCULATED RESULTS****
=== PAH Sums === 
Total low molecular weight PAHs (chemcode = LPAH) were calculated for samples with two or more of the following chemicals reported:
  acenaphthene
  anthracene
  biphenyl
  2,6-dimethylnaphthalene
  fluorene
  1-methylnaphthene
  2-methylnapthene
  1-methylphenanthrene
  phenanthrene
  naphthalene
  
CHEMCODES = ACENAPTHEN, ANTHRACENE, BIPHENYL, METNAP26_2, FLUORENE, METHNAP_1, METHNAP_2, METPHENAN1, PHENANTHRN, NAPTHALENE

Total high molecular weight PAHs (chemcode = HPAH) were calculated for samples with two or more of the following chemicals reported:  
  benz(a)anthracene
  benzo(a)pyrene
  benzo€pyrene
  chrysene
  dibenz(a,h)anthracene
  fluoranthene
  perylene
  pyrene
  
CHEMCODES = BAA, BAP, BEP, CHRYSENE, BANTH2, FLUORANTHN, PERYLENE, PYRENE

Total PAHs (chemcode = TOTAL_PAH) were calculated as the sum of the LPAH and HPAH chemicals as listed above.

****BIOASSAY****
 

****QUALIFIERS****
Qualifiers definitions are provided in the qualifier table.  Definitions were provided with the source data. 

--------------------------------------------------
0936C7--ED Team 5 2015 Mussel and Tarball Sampling
--------------------------------------------------
****DATA SOURCE****
Source: RefugioSampleDatabase.accdb and Refugio_FinalCSV.accdb

Source data was used as is, without attempting to resolve inconsistencies.

****STUDY PURPOSE****
The purpose of this study is: Assessment

****DATA USE QUALIFICATION****
The data is validated and qualified but the validator and the validation level are not known.

****DATA TYPES****
This study includes results for tissue and oil.

****STATIONS****
Original station coordinates were provided as NAD83 latitude and longitude.  Coordinates were included as reported in the source data.  The reliability of the coordinates was not specified.

The Station identifiers reported in the source data are stored in the ExStnID field.  

The Station identifiers in the source data were truncated for inclusion in the database.

****SAMPLES AND REPLICATES****
The Sample identifiers reported in the source data are stored in the ExSampID field.  The Sample identifiers in the source data were truncated for inclusion in the database. 

Some of the Original Sample Identifiers exceeded 20 characters, so they were placed in the Sample Attribute field.

Sampling dates and sample depth information were provided for all samples.

****CHEMISTRY****
Detection limits were not available for the entire data set.  When possible, the Result value for non-detects reflects the Detection Limit.  If the DL was unavailable, the Reporting Limit was used instead.

****CALCULATED RESULTS****
=== PAH Sums === 
Total low molecular weight PAHs (chemcode = LPAH) were calculated for samples with two or more of the following chemicals reported:
  acenaphthene
  anthracene
  biphenyl
  2,6-dimethylnaphthalene
  fluorene
  1-methylnaphthene
  2-methylnapthene
  1-methylphenanthrene
  phenanthrene
  naphthalene
  
CHEMCODES = ACENAPTHEN, ANTHRACENE, BIPHENYL, METNAP26_2, FLUORENE, METHNAP_1, METHNAP_2, METPHENAN1, PHENANTHRN, NAPTHALENE

Total high molecular weight PAHs (chemcode = HPAH) were calculated for samples with two or more of the following chemicals reported:  
  benz(a)anthracene
  benzo(a)pyrene
  benzo€pyrene
  chrysene
  dibenz(a,h)anthracene
  fluoranthene
  perylene
  pyrene
  
CHEMCODES = BAA, BAP, BEP, CHRYSENE, BANTH2, FLUORANTHN, PERYLENE, PYRENE

Total PAHs (chemcode = TOTAL_PAH) were calculated as the sum of the LPAH and HPAH chemicals as listed above.

****BIOASSAY****
 

****QUALIFIERS****
Qualifiers definitions are provided in the qualifier table.  Definitions were provided with the source data. 

--------------------------------------------------
0936C9--ED Team 7 2015 Mussel Sampling
--------------------------------------------------
****DATA SOURCE****
Source: RefugioSampleDatabase.accdb and Refugio_FinalCSV.accdb

Source data was used as is, without attempting to resolve inconsistencies.

****STUDY PURPOSE****
The purpose of this study is: Assessment

****DATA USE QUALIFICATION****
The data is validated and qualified but the validator and the validation level are not known.

****DATA TYPES****
This study includes results for tissue.

****STATIONS****
Original station coordinates were provided as NAD83 latitude and longitude.  Coordinates were included as reported in the source data.  The reliability of the coordinates was not specified.

The Station identifiers reported in the source data are stored in the ExStnID field.  

The Station identifiers in the source data were truncated for inclusion in the database.

****SAMPLES AND REPLICATES****
The Sample identifiers reported in the source data are stored in the ExSampID field.  The Sample identifiers in the source data were truncated for inclusion in the database. 

Some of the Original Sample Identifiers exceeded 20 characters, so they were placed in the Sample Attribute field.

Sampling dates and sample depth information were provided for all samples.

****CHEMISTRY****
Detection limits were not available for the entire data set.  When possible, the Result value for non-detects reflects the Detection Limit.  If the DL was unavailable, the Reporting Limit was used instead.

****CALCULATED RESULTS****
=== PAH Sums === 
Total low molecular weight PAHs (chemcode = LPAH) were calculated for samples with two or more of the following chemicals reported:
  acenaphthene
  anthracene
  biphenyl
  2,6-dimethylnaphthalene
  fluorene
  1-methylnaphthene
  2-methylnapthene
  1-methylphenanthrene
  phenanthrene
  naphthalene
  
CHEMCODES = ACENAPTHEN, ANTHRACENE, BIPHENYL, METNAP26_2, FLUORENE, METHNAP_1, METHNAP_2, METPHENAN1, PHENANTHRN, NAPTHALENE

Total high molecular weight PAHs (chemcode = HPAH) were calculated for samples with two or more of the following chemicals reported:  
  benz(a)anthracene
  benzo(a)pyrene
  benzo€pyrene
  chrysene
  dibenz(a,h)anthracene
  fluoranthene
  perylene
  pyrene
  
CHEMCODES = BAA, BAP, BEP, CHRYSENE, BANTH2, FLUORANTHN, PERYLENE, PYRENE

Total PAHs (chemcode = TOTAL_PAH) were calculated as the sum of the LPAH and HPAH chemicals as listed above.

****BIOASSAY****
 

****QUALIFIERS****
Qualifiers definitions are provided in the qualifier table.  Definitions were provided with the source data. 

--------------------------------------------------
0936D4--Fish and Mussels 2015 Sampling
--------------------------------------------------
****DATA SOURCE****
Source: RefugioSampleDatabase.accdb and Refugio_FinalCSV.accdb

Source data was used as is, without attempting to resolve inconsistencies.

****STUDY PURPOSE****
The purpose of this study is: Assessment

****DATA USE QUALIFICATION****
The data is validated and qualified but the validator and the validation level are not known.

****DATA TYPES****
This study includes results for tissue.

****STATIONS****
Original station coordinates were provided as NAD83 latitude and longitude.  Coordinates were included as reported in the source data.  The reliability of the coordinates was not specified.

The Station identifiers reported in the source data are stored in the ExStnID field.  

The Station identifiers in the source data were truncated for inclusion in the database.

****SAMPLES AND REPLICATES****
The Sample identifiers reported in the source data are stored in the ExSampID field.  The Sample identifiers in the source data were truncated for inclusion in the database. 

Some of the Original Sample Identifiers exceeded 20 characters, so they were placed in the Sample Attribute field.

Sampling dates and sample depth information were provided for all samples.

Some of the tissue samples were reported in the database as composites; this sample type code was retained in the database although no individual locations or other information on  individual part samples was included in the source data.

****CHEMISTRY****
Detection limits were not available for the entire data set.  When possible, the Result value for non-detects reflects the Detection Limit.  If the DL was unavailable, the Reporting Limit was used instead.

****CALCULATED RESULTS****
=== PAH Sums === 
Total low molecular weight PAHs (chemcode = LPAH) were calculated for samples with two or more of the following chemicals reported:
  acenaphthene
  anthracene
  biphenyl
  2,6-dimethylnaphthalene
  fluorene
  1-methylnaphthene
  2-methylnapthene
  1-methylphenanthrene
  phenanthrene
  naphthalene
  
CHEMCODES = ACENAPTHEN, ANTHRACENE, BIPHENYL, METNAP26_2, FLUORENE, METHNAP_1, METHNAP_2, METPHENAN1, PHENANTHRN, NAPTHALENE

Total high molecular weight PAHs (chemcode = HPAH) were calculated for samples with two or more of the following chemicals reported:  
  benz(a)anthracene
  benzo(a)pyrene
  benzo€pyrene
  chrysene
  dibenz(a,h)anthracene
  fluoranthene
  perylene
  pyrene
  
CHEMCODES = BAA, BAP, BEP, CHRYSENE, BANTH2, FLUORANTHN, PERYLENE, PYRENE

Total PAHs (chemcode = TOTAL_PAH) were calculated as the sum of the LPAH and HPAH chemicals as listed above.

****BIOASSAY****
 

****QUALIFIERS****
Qualifiers definitions are provided in the qualifier table.  Definitions were provided with the source data. 

